HP-UX Reference (11i v1 00/12) - 1M System Administration Commands A-M (vol 3)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/!!!intro.1m
________________________________________________________________
___ ___
m
mc(1M) mc(1M)
A SCSI pass-through driver must be configured and the device file created before this command can be
used to manipulate the autoloader.
For devices connected to HPPB SCSI interface cards, the spt pass-through driver must be configured. See
scsi_pt(7).
For devices connected to all other SCSI interface cards (HSC, PCI, or EISA), the sctl pass-through driver
must be configured. See scsi_ctl(7).
AUTHOR
mc was developed by Hewlett-Packard.
FILES
/dev/scsi/3 Default pass-through device file.
SEE ALSO
mt(1), scsi(7), scsi_ctl(7), scsi_pt(7).
HP-UX Release 11i: December 2000 − 3 − Section 1M−−461
___
___