HP-UX Reference (11i v1 00/12) - 1M System Administration Commands A-M (vol 3)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/!!!intro.1m
________________________________________________________________
___ ___
a
amdsp(1M) amdsp(1M)
The above will be displayed for each controller installed. The first type of record shown above
will be displayed for each Subsystem whose value is 0. The second record type will be displayed
when the Subsystem is greater than 0.
Quiesced is a boolean field indicating whether the controller is quiescent.
CntrlrMode, Quiesced, CntrlrDate, CntrlrTime, and CacheBattAge are only defined when the
Subsystem is 0 (array controller enclosure). Otherwise they are undefined.
EncSerNum is the serial number of the disk subsystem enclosure.
CntrlrTime is a colon delimited field having a format of HH:MM:SS.
If CompState is not GOOD (1), or CntrlrMode is FAILED (4), information in the remaining fields
may be undefined or absent.
ALPA and PreferredALPA are displayed in hexadecimal.
CacheBattAge is the time in days (rounded to the nearest 90 days) since the cache battery age
was last reset.
-d The following output is provided for each installed disk:
PD:Channel:ID:EnclosureID:SlotID:DiskState:DiskGroupID:DGType:
Capacity:Manufacturer:Model:FWRevision:SerialNum:ArrayID
OR
PD:Channel:ID:EnclosureID:SlotID:DiskState:DiskGroupID:DGType:
Capacity:Manufacturer:Model:FWRevision:SerialNum:ArrayID:
SparedChannel:SparedID
The leading PD is literal to identify this as a PHYSICAL DISK record.
The above will be displayed for each disk slot. For disks which have been bound to a LUN and
then removed, or assigned as a hot spare and then removed, the Manufacturer, Model, FWRevi-
sion and SerialNum fields may be undefined.
Unassigned disks which are removed will have no PD record.
Capacity is displayed in GB, rounded up to the nearest GB.
If DGType is
1 (HOT SPARE), and if this disk is currently sparing another disk, then two extra
fields will be printed, designating the channel and SCSI ID of the spared disk.
-g One or more LUN records will be displayed in the following format:
G:VendorID:ProductID:<DiskGroupID>:<DGType>:
NumLUns:<LUN>...:RemCapacity:RAIDLevel:SegmentSize:nDisks:
Channel-ID,Channel-ID...:<ArrayID>
The leading G is literal to identify this as a Disk Group record.
The above fields will be displayed for each disk group.
The following fields are undefined when DGType is 1 or 2: NumLUNs, LUN, RemCapacity,
RAIDLevel, and SegmentSize.
Note that capacity will always be expressed in MB for raw output.
-h One or more "component state records" will be displayed in the following format:
H:VendorID:ProductID:<SubSystem>:CntrlrAStatus:CntrlrBStatus:
PS1Status:PS2Status:Fan1Status:Fan2Status:TsensorStatus:
BattStatus:EncSerNum:ArrayID
OR
H:VendorID:ProductID:SubSystem:CntrlrAStatus:CntrlrBStatus:
PwrSupplyAStatus:PwrSupplyBStatus:FanAStatus:FanBStatus:
TsensorStatus:BattStatus:EncSerNum:ArrayID
The leading H is literal to identify this as a Hardware Status record.
When the SubSystem is greater than 0 (disk enclosure), the BattStatus is undefined.
Section 1M−−28 − 4 − HP-UX Release 11i: December 2000
___
___