HP-UX Reference (11i v1 00/12) - 1M System Administration Commands A-M (vol 3)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/!!!intro.1m
________________________________________________________________
___ ___
l
lvmmigrate(1M) lvmmigrate(1M)
lvmmigrate -v -n
Include file system /mnt in the root volume group for migration and exclude file system /usr/source .
Write configuration information in the boot section of disk /dev/dsk/c1t0d0:
lvmmigrate -d /dev/dsk/c1t0d0 -i /mnt -e /usr/source
WARNINGS
Use of the -f option results in overwriting the contents of the boot section. Before using the -f option be
sure to back up all data on the boot section of the disk specified with the -d option.
If there is no LIF volume, lvmmigrate uses lifinit to create it (see lifinit(1)). If file CUSTOM
already exists in the LIF volume, lvmmigrate rewrites it.
Caution: All data on disks being used for reinstallation must be backed up to a separate device because the
install process overwrites data on all disks used in the new root volume group.
SEE ALSO
lifinit(1).
Section 1M−−446 − 2 − HP-UX Release 11i: December 2000
___
___