HP-UX Reference (11i v1 00/12) - 1M System Administration Commands A-M (vol 3)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/!!!intro.1m
________________________________________________________________
___ ___
i
insf(1M) insf(1M)
port: 0 to 1, direct connect
schgr
See autox0.
sdisk
See disc3.
sflop
See pflop.
stape tape2
For each driver instance, different special files are installed depending on the number of characters
allowed in the target directory. There are two lists below, one for long file name directories and one
for short file name directories (14 characters maximum). Short file names are used for files installed
on an NFS file system.
Note that the first four special files in each list for tape driver instances 0-9 are also linked to
rmt/instancem, rmt/instancemb, rmt/instancemn, and rmt/instancemnb, respectively.
For installationin a long file name directory:
rmt/ccardttargetddeviceBEST rw-rw-rw- bin bin
AT&T-style, best available density, character entry
rmt/ccardttargetddeviceBESTb rw-rw-rw- bin bin
Berkeley-style, best available density, character entry
rmt/ccardttargetddeviceBESTn rw-rw-rw- bin bin
AT&T-style, no rewind, best available density, character entry
rmt/ccardttargetddeviceBESTnb rw-rw-rw- bin bin
Berkeley-style, no rewind, best available density, character entry
For installationin a short file name directory:
rmt/ccardttargetddevicef0 rw-rw-rw- bin bin
AT&T-style, best available density, character entry
rmt/ccardttargetddevicef0b rw-rw-rw- bin bin
Berkeley-style, best available density, character entry
rmt/ccardttargetddevicef0n rw-rw-rw- bin bin
AT&T-style, no rewind, best available density, character entry
rmt/ccardttargetddevicef0nb rw-rw-rw- bin bin
Berkeley-style, no rewind, best available density, character entry
For both long and short file name directories, the following additional files are created.
rmt/driver_name_config rw-r--r-- bin bin
Tape configuration, character entry
diag/rmt/ccardttargetddevice rw------- bin bin
For tape2 only, diagnostic access, character entry
stcpmap
The following special file is installed:
stcpmap rw-rw-rw- root sys
strlog
The following special file is installed:
strlog rw-rw-rw- root sys
sy
The following special file is installed:
tty rw-rw-rw- bin bin
tape2
See stape.
tcp The following special file is installed:
HP-UX Release 11i: December 2000 − 9 − Section 1M−−359
___
___