HP-UX Reference (11i v1 00/12) - 1M System Administration Commands A-M (vol 3)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/!!!intro.1m
________________________________________________________________
___ ___
f
fcmsutil(1M) fcmsutil(1M)
NAME
fcmsutil - Fibre Channel Mass Storage Utility Command for the TACHYON A3740A, A3591A, A3404A,
A3636A, and TACHYON TL A5158A Fibre Channel Host Bus Adapters.
SYNOPSIS
/opt/fcms/bin/fcmsutil device_file
/opt/fcms/bin/fcmsutil device_file echo remote-AL_PA [data-size][count]
/opt/fcms/bin/fcmsutil device_file rls remote-AL_PA
/opt/fcms/bin/fcmsutil device_file test remote-AL_PA [data-size][count]
/opt/fcms/bin/fcmsutil device_file read offset [pci]
/opt/fcms/bin/fcmsutil device_file write offset [pci]
/opt/fcms/bin/fcmsutil device_file [-f] lb [plm|tachyon]
/opt/fcms/bin/fcmsutil device_file get local|fabric
/opt/fcms/bin/fcmsutil
device_file get remote
{all|remote-AL_PA}
/opt/fcms/bin/fcmsutil
device_file get_lgn
AL_PA
/opt/fcms/bin/fcmsutil
device_file reset
/opt/fcms/bin/fcmsutil
device_file [-f] bdr target-device_file
/opt/fcms/bin/fcmsutil
device_file read_cr
/opt/fcms/bin/fcmsutil
device_file lgninfo_all
/opt/fcms/bin/fcmsutil
device_file stat [-s]
/opt/fcms/bin/fcmsutil
device_file clear_stat
/opt/fcms/bin/fcmsutil
device_file nsstat
/opt/fcms/bin/fcmsutil
device_file clear_nsstat
/opt/fcms/bin/fcmsutil
device_file devstat {all|remote-AL_PA}
/opt/fcms/bin/fcmsutil
device_file clear_devstat {all|remote-AL_PA}
/opt/fcms/bin/fcmsutil
device_file replace_dsk remote-AL_PA
/opt/fcms/bin/fcmsutil
device_file [-f] disable
/opt/fcms/bin/fcmsutil
device_file enable
NOTE:
AL_PA is Arbitrated Loop Physical Address. It is the one-byte value used to identify a
port in an Arbitrated Loop topology. The value of AL_PA corresponds to bits 7:0 of the 24-bit
Native Address Identifier.
NOTE: For the TACHYON TL A5158A card, remote-AL_PA can be substituted with -l loop_id
(in Private Loop), or -w wwn for all options that take remote-AL_PA as an argument. The
devstat all option displays the loop_id (in Private Loop) along with the statistics for all
N_Ports, the initiator was able to communicate with.
DESCRIPTION
The fcmsutil command is a diagnostic tool to be used for the TACHYON A3740A, A3591A, A3404A,
A3636A and TACHYON TL A5158A Fibre Channel Host Bus Adapters. This command provides the ability
to perform Fibre Channel Test and Echo functionality, read the card’s registers, etc. This command
requires the use of a device file to indicate the interface over which the requested command needs to be
performed. The options that are available only for the TACHYON A3740A, A3591A, A3404A and A3636A
HBAs are indicated by a "T" in the description for the option. The options that are available only for the
TACHYON TL A5158A HBA are indicated by a "TL" in the description for the option. All other options
(which do not have the "T" or "TL" indication) are supported (completely or partially) by all the above
HBAs.
fcmsutil can be used only by users who have an effective user ID of 0. Some of the options
require detailed knowledge of the device specific adapter.
HP-UX Release 11i: December 2000 − 1 − Section 1M−−219
___
___