HP-UX Reference (11i v1 00/12) - 1M System Administration Commands A-M (vol 3)
__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/!!!intro.1m
________________________________________________________________
___ ___
d
dteststat(1M) dteststat(1M)
The command failed because the disk array has been powered-on or reset. Reissue the command and
it should succeed.
EXAMPLES
Display the results of the test performed on the disk installed in slot B3 of the disk array identified by dev-
ice file /dev/rdsk/c2t0d0:
dteststat -D B3 /dev/rdsk/c2t0d0
Display the results of the tests performed on all disks installed in the disk array identified by alias
AUTORAID1:
dteststat AUTORAID1
Cancel a test currently in progress on the disk installed in slot A1 of disk array serial number
00786b5c0000 :
dteststat -D A1 -c 00786b5c0000
DEPENDENCIES
ARMServer must be running to execute this command. See ARMServer(1M).
SECURITY CONFIGURATION
This command is modified for all security configurations.
Security Behavior/Restrictions
Use of this command is restricted to authorized users only.
Command Authorizations
This command requires the
sysadmin authorization to successfully execute.
Privileges
The command has been modified to support least privilege. The potential privileges possessed by the com-
mand and their uses include:
allowdacread This privilege is raised to provide discretionary read access to the devices.
allowdacwrite This privilege is raised to provide discretionary write access to the devices.
allowmacread This privilege is raised to provide mandatory read access to the devices.
allowmacwrite This privilege is raised to provide mandatory write access to the devices.
filesysops This privilege is raised to allow the mknod(2) system call to succeed.
writeaudit The command generates its own audit records and submits these directly to the sys-
tem audit trail. This privilege is raised whenever the command needs to write an
audit record.
AUTHOR
dteststat was developed by HP.
SEE ALSO
ARMServer(1M), arraycfg(1M), arraydsp(1M), arrayfmt(1M), arraylog(1M), arraymgr(1M), arrayrbld(1M),
arrayrecover(1M), download(1M), drivetest(1M), logprint(1M).
HP-UX Release 11i: December 2000 − 2 − Section 1M−−191
___
___