HP-UX Reference (11i v1 00/12) - 1M System Administration Commands A-M (vol 3)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/!!!intro.1m
________________________________________________________________
___ ___
b
bootpd(1M) bootpd(1M)
call-on-assignment="/usr/local/bin/assignment.script" :\
subnet-mask=255.255.255.0 :\
addr-pool-start-address= 15.13.128.100 :\
addr-pool-last-address= 15.13.128.254 :\
gw=15.13.128.1 :\
This is an example of a /etc/dhcpdeny file:
# Sample /etc/dhcpdeny file
080009000001
0x080009000002
# Above two clients will not be served!
WARNINGS
Individual host entries must not exceed 1024 characters.
AUTHOR
bootpd was developed by Carnegie Mellon University, Stanford University, and HP.
FILES
/etc/bootptab
/etc/dhcptab
/etc/services
SEE ALSO
bootpquery(1M), dhcptools(1M), inetd(1M), tftpd(1M), syslog(3C), hosts(4).
DARPA Internet Requests For Comments: RFC865, RFC868, RFC887, RFC951, RFC1010, RFC1034,
RFC1048, RFC1084, RFC1395, RFC1533, RFC1534, RFC1541, RFC1542.
Section 1M−−116 − 13 − HP-UX Release 11i: December 2000
___
___