HP-UX Reference (11i v1 00/12) - 1M System Administration Commands A-M (vol 3)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1m/!!!intro.1m
________________________________________________________________
___ ___
b
bootpd(1M) bootpd(1M)
is not found, the hosts(4) database is then checked. If the hostname cannot fit into the reply
packet, an attempt is made to shorten the name to just the host field (up to the first period, if
present) and then tried. In no case is an arbitrarily truncated host name sent. If nothing rea-
sonable can fit, nothing is sent.
im=ip_address_list
This tag specifies the IP addresses of Impress network image servers.
ip=ip-address
This tag specifies the IP address of the DHCP/BOOTP client.
lg=ip_address_list
This tag specifies the IP addresses of MIT-LCS UDP log servers.
lp=ip_address_list
This tag specifies the IP addresses of Berkeley 4BSD printer servers.
md=merit_dump_file
This tag specifies the name of a file to dump the core of a client.
ms=ip_address_list
This tag specifies the IP address(es) of SMTP servers available to the client (RFC2132).
na=ip_address_list
This tag specifies the IP address(es) of RFC 1001/1002 NetBIOS name server(s) in order of
preference.
nb=ip_address_list
This tag specifies the IP address(es) of RFC 1001/1002 NetBIOS datagram distribution server(s)
in order of preference.
nc=NetBIOS_node_type
Specifies the NetBIOS node type code. Allows NetBIOS over TCP/IP clients to be configured as
described in RFC1001/1002. The NetBIOS_node_type can be an unsigned decimal, octal, or hexa-
decimal integer corresponding to one of the client types as follows:
0x1 or B-node for B-node;
0x2 or P-node for P-node;
0x4 or M-node for M-node;
0x8 or H-node for H-node.
nd=string
This tag specifies the NetBIOS over TCP/IP scope parameter for the client as specified in RFC
1001/1002.
ns=ip_address_list
This tag specifies the IP addresses of IEN-116 name servers.
nt=ip_address_list
This tag specifies the IP addresses of Network Time Protocol servers. Servers should be listed in
order of preference.
pd=NIS+-domain-name
This tag specifies the name of clients NIS+ domain name (RFC2132).
ps=ip_address_list
This tag specifies the IP address(es) of NIS+ servers available to the client (RFC2132).
rl=ip_address_list
This tag specifies the IP addresses of RFC887 Resource Location Protocol servers.
rp=root_path
This tag specifies a path name to be mounted as a root disk.
sm=subnet-mask
This tag specifies the client’s subnet mask. subnet-mask is specified as a single IP address.
sr=destination_ip_address gateway_ip_address ...
This tag specifies a list of static routes that the client should put in its routing cache. Each route
consists of a pair of IP addresses. The first address is the destination address, and the second is
the router. Use the gw= option to specify the default route (0.0.0.0) as it is not a legal destina-
tion address.
Section 1M−−108 − 5 − HP-UX Release 11i: December 2000
___
___