HP-UX Reference (11i v1 00/12) - 1 User Commands N-Z (vol 2)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1/neqn.1
________________________________________________________________
___ ___
t
tsm(1) tsm(1)
is ignored.
k Load the softkeys of the current session from a file. To load tsm defaults, specify ‘‘file’’ +.To
load terminal defaults, specify ‘‘file’’ -.
g Same as k above but softkeys are loaded ‘‘globally’’ into all sessions.
x Access extended tsm commands as described in the tsm reference manual or on the tsm
help screen.
q Quit tsm: SIGHUP is sent to all processes started under tsm, and tsm exits.
EXTERNAL INFLUENCES
In general tsm environment variables must be set prior to tsm invocation. TSMLP is the lp(1) name of
a printer that gets its output redirected to the printer port of the terminal.
TSMTPATH specifies an alternate search path for tsm files.
TSMTERM specifies an alternate terminal information file to be used by tsm instead of that specified by
TERM. TSMHOTKEY specifies an alternate tsm hotkey for invocation ot the tsm command line.
WARNINGS
Some operations are not supported on certain terminals.
AUTHOR
tsm was developed by Structured Software Solutions, Inc.
FILES
/usr/tsm/.tsm tsm main configuration file (default). Copy to
$HOME for user customiza-
tion.
/usr/tsm/.tsmkeys tsm
softkey configuration file (default). Copy to $HOME for user customi-
zation.
/usr/tsm/term/* terminal description files
SEE ALSO
tsm.info(1), tsm.command(1), tsm.lpadmin(3M), shl(1).
Section 1−−950 − 2 − HP-UX Release 11i: December 2000
___
___