HP-UX Reference (11i v1 00/12) - 1 User Commands N-Z (vol 2)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1/neqn.1
________________________________________________________________
___ ___
p
pdpr(1) pdpr(1)
(TO BE OBSOLETED)
Current Printer Printers
Job ID Name State Requested Assigned
8 sp15:075410002 File1 pending LogPrt1
To submit the file File1 to the default logical printer and receive brief status information without head-
ings, enter one of the following commands:
pdpr -g -r brief File1
pdpr -x "headings=no requested-attributes=brief" File1
HPDPS displays information similar to the following about your job:
8 sp15:075410002 File1 pending LogPrt1
Delay Printing of File
To submit the file BigJob to the default logical printer and delay printing until after 6:30 p.m., enter the
command:
pdpr -x job-print-after=18:30:00 BigJob
Delay Printing of File and Specifying a Symbolic Link
To submit the file BigJob to a logical printer LogPrt4 without copying the file and delay printing until
after 6:30 p.m. on April 4, 1995, enter the following command:
pdpr -l -x job-print-after="18:30:00 04/04/95" BigJob
Job Discard Time
To submit the file BigJob to the default logical printer and specify that the job is to be discarded if it has
not printed by 5:00 p.m., enter the command:
pdpr -x job-discard-time=17:00:00 BigJob
Job to a Specific Printer Location
To submit the file File5 to be printed on one of the printer devices located in building 20 room 17, enter the
command:
pdpr -p LogPrt20 -x printer-locations-requested=bld20.rm17 File5
Job to a Specific Physical Printer
To submit the file File5 to be printed on physical printer PhysPrt1, enter the command:
pdpr -p LogPrt20 -x physical-printers-requested=PhysPrt1 File5
Retaining a Job
To submit the file File1 to the default logical printer, request feedback of job attributes (brief group), and
specifying a retention period of 90 minutes so you can print more copies after you have looked at the first
copy, enter the command:
pdpr -r brief -x job-retention-period=90 File1
You want to note the job number (local ID) so you can use that number when you want to print more copies
within the time allotted.
Specifying an Initial Value Object (IVO)
To submit the file File1 to the default logical printer and use the job attribute values specified in the ini-
tial value job ivj23, enter the command:
pdpr -x initial-value-job=ivj23 File1
To submit the file File1 to the default logical printer and use the document attribute values specified in
the initial value document ivd44, enter the command:
pdpr -x initial-value-document=ivd44 File1
To submit the file File1 to the default logical printer and use both IVOs specified in the previous two
examples, enter the command:
pdpr -x "initial-value-document=ivd44 initial-value-job=ivj23" File1
HP-UX Release 11i: December 2000 − 5 − Section 1−−705
___
___