HP-UX Reference (11i v1 00/12) - 1 User Commands N-Z (vol 2)

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1/neqn.1
________________________________________________________________
___ ___
p
parstatus(1) parstatus(1)
-b cabinet Show information about the specified cabinet.
The cabinet number can be 0-7 for compute cabinets, 8-15 for IO expansion cabinets.
-p PartitionNumber
Show information about the specified partition. PartitionNumber is the unique Partition
number (integer) assigned to this partition.
EXIT STATUS
The parstatus utility exits with one of the following values:
0 Successful completion.
1 Error condition occurred.
EXAMPLES
Display information for all the cells in the complex.
parstatus -C
The output format is as shown below.
Cab/Slot I/Ochassis MemoryPresent CPU’sPresent Status ParName ParId
AUTHOR
parstatus was developed by the Hewlett-Packard Company.
SEE ALSO
fruled(1), partition(1), frupower(1M), parcreate(1M), parmodify(1M), parremove(1M), parunlock(1M).
HP-UX Release 11i: December 2000 − 2 − Section 1−−643
___
___