Red Hat Directory Server 8.0 Configuration, Command, and File Reference

Parameter Description

Default Value None (because

nsslapd-auditlog-logrotationsync-enabled

is off)

Syntax Integer

Example nsslapd-auditlog-logrotationsyncmin: 30

3.1.29. nsslapd-auditlog-logrotationtime (Audit Log Rotation Time)

This attribute sets the time between audit log file rotations. The audit log is rotated when this

time interval is up, regardless of the current size of the audit log. This attribute supplies only the

number of units. The units (day, week, month, and so forth) are given by the

nsslapd-auditlog-logrotationtimeunit attribute. If the

nsslapd-auditlog-maxlogsperdir attribute is set to 1, the server ignores this attribute.

Although it is not recommended for performance reasons to specify no log rotation, as the log

grows indefinitely, there are two ways of specifying this. Either set the

nsslapd-auditlog-maxlogsperdir attribute value to 1 or set the

nsslapd-auditlog-logrotationtime attribute to -1. The server checks the

nsslapd-auditlog-maxlogsperdir attribute first, and, if this attribute value is larger than 1, the

server then checks the nsslapd-auditlog-logrotationtime attribute. See Section 3.1.32,

“nsslapd-auditlog-maxlogsperdir (Audit Log Maximum Number of Log Files)” for more

information.

Parameter Description

Entry DN cn=config

Valid Range -1 | 1 to the maximum 32 bit integer value

(2147483647), where a value of -1 means

that the time between audit log file rotation is

unlimited.

Default Value 1

Syntax Integer

Example nsslapd-auditlog-logrotationtime: 100

3.1.30. nsslapd-auditlog-logrotationtimeunit (Audit Log Rotation

Time Unit)

This attribute sets the units for the nsslapd-auditlog-logrotationtime attribute.

Parameter Description

Entry DN cn=config

Valid Values month | week | day | hour | minute

cn=config