Red Hat Directory Server 8.0 Configuration, Command, and File Reference

For audit log rotation to be synchronized with time-of-day, this attribute must be enabled with
the nsslapd-auditlog-logrotationsynchour and nsslapd-auditlog-logrotationsyncmin
attribute values set to the hour and minute of the day for rotating log files.
For example, to rotate audit log files every day at midnight, enable this attribute by setting its
value to on, and then set the values of the nsslapd-auditlog-logrotationsynchour and
nsslapd-auditlog-logrotationsyncmin attributes to 0.
Parameter Description
Entry DN cn=config
Valid Values on | off
Default Value off
Syntax DirectoryString
Example nsslapd-auditlog-logrotationsync-enabled: on
3.1.27. nsslapd-auditlog-logrotationsynchour (Audit Log Rotation
Sync Hour)
This attribute sets the hour of the day for rotating audit logs. This attribute must be used in
conjunction with nsslapd-auditlog-logrotationsync-enabled and
nsslapd-auditlog-logrotationsyncmin attributes.
Parameter Description
Entry DN cn=config
Valid Range 0 through 23
Default Value None (because
nsslapd-auditlog-logrotationsync-enabled
is off)
Syntax Integer
Example nsslapd-auditlog-logrotationsynchour: 23
3.1.28. nsslapd-auditlog-logrotationsyncmin (Audit Log Rotation
Sync Minute)
This attribute sets the minute of the day for rotating audit logs. This attribute must be used in
conjunction with nsslapd-auditlog-logrotationsync-enabled and
nsslapd-auditlog-logrotationsynchour attributes.
Parameter Description
Entry DN cn=config
Valid Range 0 through 59
Chapter 2. Core Server Configuration Reference
26