HP MLIB User's Guide Vol. 1 7th Ed.

Chapter 1 Introduction to VECLIB 9
Accessing VECLIB
–aarchive_shared,−L/opt/mlib/lib/[hpux32|hpux64]
For example:
setenv LDOPTS “–aarchive_shared,–L/opt/mlib/lib/hpux32”
Then use the −lveclib option on the compiler command line that links your
program:
f90 [options] file ... −lveclib
cc [options] file ... −lveclib −lcl −lm
aCC
[options] file ... −lveclib −lcl −lm
NOTE An LDOPTS specification takes precedence over using -Wl on the
compiler command line. That is, if you use the LDOPTS environment
variable to specify a library path, you cannot override that specification
with a -Wl option on your compiler command line.
5. To link with the VECLIB8 libraries on an HP-UX system, use the +DD64
option to specify memory addresses are 64-bit.
Compile Fortran applications with the +i8, +autodbl, or +autodbl4 option
where:
• +i8 promotes 4-byte integer of logical constants, intrinsics, and user
variables (declared as integer or logical) to 8-byte quantities.
• +autodbl promotes all integer, logical, and real items to 8 bytes, and all
double-precision and complex items to 16 bytes.
• +autodbl4 promotes all integer logical, and real items to 8 bytes, and
complex items to 16 bytes. The +autodbl4 option does not promote the
size of double-precision and double-complex items.
f90 +DD64 +i8 [options] file ... −Wl,–aarchive_shared −lveclib8
cc +DD64
[options] file ... −Wl,–aarchive_shared −lveclib8 −lcl −lm
aCC +DD64
[options] file ... −Wl,–aarchive_shared −lveclib8 −lcl −lm
For Itanium-Based Red Hat Linux Systems
1. To link a program that uses VECLIB for use on the same machine, use one
of the following commands:
ifort [options] file ... –Wl,–Bstatic −lveclib −openmp
icc
[options] file ... –Wl,–Bstatic −lveclib −openmp
Link with -Bdynamic if you want the archive library on a linux system.