ClusterPack V2.5 DVD Insert

15
NOTE If you are installing ClusterPack on
Compute Nodes for the first time, DO
NOT
power up the systems.
ClusterPack will do that for you
automatically. If you do accidentally
power the compute nodes,
DO NOT
answer the HP-UX boot questions.
Step 6. Power Up the Management Server
Perform a normal boot process for the Management
Server.
Step 7. Configure the ProCurve Switch
• Select an IP address from the same IP subnet
that will be used for the Compute Nodes.
• Connect a console to the switch.
• Log onto the switch through the console.
• Type set up.