Getting Started Guide

6
At the sftp prompt, enter the following command:
sftp> put /.ssh/id_dsa.pub
The following output is displayed:
Uploading /.ssh/id_dsa.pub to /id_dsa.pub
7
To quit the SFTP session, enter the following command:
sftp> quit
8
To begin the ssh session on the target system (system2 in this example), enter
the following command on system1:
system1 # ssh system2
Enter the root password of system2 at the prompt:
password:
9
After you log in to system2, enter the following command to append the
id_dsa.pub file to the authorized_keys file:
system2 # cat /id_dsa.pub >> /.ssh/authorized_keys
10
After the id_dsa.pub public key file is copied to the target system (system2),
and added to the authorized keys file, delete it. To delete the id_dsa.pub
public key file, enter the following command on system2:
system2 # rm /id_dsa.pub
11
To log out of the ssh session, enter the following command:
system2 # exit
Installation overview
Configuring secure shell (ssh) or remote shell before installing products
22