Command Reference Guide

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1/!!!intro.1
________________________________________________________________
___ ___
f
fruled(1) fruled(1)
NAME
fruled - turn on/off attention LEDs (cell, cabinet and I/O chassis attention LEDs)
SYNOPSIS
fruled [-f|-o][-B] -c cell [-c...]
fruled [-f|-o][-B] -i I/Ochassis [-i...]
fruled [-f|-o] -b cabinet [-b...]
fruled [-f] -C [-l cabinet][-l...]
fruled [-f] -I [-l cabinet][-l...]
DESCRIPTION
The fruled command turns on/off attention LEDs of cells or I/O chassis. The command can also be used
to start or stop flashing cabinet number LEDs.
If a cell attention LED is being illuminated, the cabinet number LED of the cabinet that contains the com-
ponent can be made to flash by using the -B option. Likewise, if an internal component’s LED is being
turned off, the cabinet number LED can also be made to stop flashing using the
-B option.
Options and Arguments
fruled recognizes the following command line options and arguments:
-f Turn off specified attention LED(s). This is the default.
The -f and -o options are mutually exclusive.
-o Turn on specified attention LED(s).
The -o option is unavailablewith -C or -I.
-B Start or stop flashing the cabinet number LED of the cabinet that contains the cell or I/O
chassis.
The -B option is only availablewith -c and -i.
-c cell Turn on/off the specified cell attention LED.
cell can be specified either in the local (cabinet#/slot#) or global (cell_ID) format. For
example, the cell located in cabinet 2, slot 4 is locally identified as 2/4 or globally as simply
20.
-i I/Ochassis Turn on/off the specified I/Ochassis attention LED.
An I/Ochassis can be specified in the form of cabinet#/enclosure#/chassis#. For example,
the I/O chassis located in cabinet 1, enclosure 4 and I/O chassis slot 1 is identified as 1/4/1.
-b cabinet Start or stop flashing the cabinet number LED of the specified cabinet.
-C Turn off all cell attention LEDs.
By default the scope will be the whole complex if -l option is not specified.
-I Turn off all I/O chassis LEDs.
By default the scope will be the entire complex if the -l option is not specified.
-l cabinet Limit the scope of the -C or -I option to a given cabinet.
EXIT STATUS
The
fruled utility exits with one of the following values:
0 Successful completion.
1 Error condition occurred.
2 No LED associated with specified object.
EXAMPLES
Turn on the attention LED of the cell located in cabinet 0 slot 4 and also turn on the attention LED of the
cabinet in which it is contained.
Section 1−−288 − 1 − HP-UX Release 11i: December 2000
___
___