Command Reference Guide

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1/!!!intro.1
________________________________________________________________
___ ___
e
eucset(1) eucset(1)
NAME
eucset - sets and gets code widths for ldterm
SYNOPSIS
eucset [-p]
eucset [[-c HP15-codeset]or[-c UTF8]or[cswidth]]
DESCRIPTION
The eucset command sets or gets (reports) the encoding and display widths of the Extended UNIX Code
(EUC) and UCS Transformation Format (UTF8) characters processed by the current input terminal. EUC
is an encoding method for codesets composed of single or multiple bytes. It permits applications and the
terminal hardware to use the 7-bit US ASCII code and up to three single byte or multibyte code sets simul-
taneously.
The eucset command without any options, first tries to set the codeset to one of the four HP15 codesets.
If unsuccessful, 7-bit US ASCII is used as the default codeset. This command must be used to specify any
other EUC codesets, whether they are single byte or multibyte. See the WARNINGS section, for special
warnings on the values of the cswidth argument.
To utilize this command for UTF8, specify UTF8 with the
-c option.
Options
The
eucset command recognizes the following options and arguments:
-p Displays the current settings of the EUC character widths for the terminal.
-c Sets the codeset to one of the four HP15 codesets or the UTF8 codeset. The HP15 codesets
supported are
SJIS, CCDC, GB, and BIG5.
EUC Code Set Classes
EUC divides codesets into four classes. Each codeset has two characteristics: the number of bytes for
encoding the characters in the codeset, and the number of display columns to display the characters in the
codeset. All characters within a codeset possess the same characteristics.
• Codeset 0 consists of all 7-bit, single byte ASCII characters. The most significant bit of each of
these characters is 0 (zero). Characters in codeset 0 require one byte for encoding, and occupy one
display column. These values are fixed for codeset 0 (zero). The 7-bit US ASCII code is the pri-
mary EUC codeset, which is availableto users without direct specification.
• Codeset 1 is a supplementary EUC codeset. Codeset 1 characters have an initial byte whose most
significant bit is 1. Characters in codeset 1 may require more than one byte for encoding, and may
require more than one display column. The eucset command must be used to set the charac-
teristics for codeset 1.
• Codesets 2 and 3 are supplementary EUC codesets. Characters in these codesets have an initial
byte of SS2 or SS3, respectively. They require more than one byte for encoding, and may require
more than one display column. The eucset command must be used to set the characteristics for
codesets 2 and 3.
The cswidth argument in the eucset command line is a character string that describes the character
widths for codesets 1 through 3. This command does not allow the user to modify the settings for codeset 0.
The character string is of the following format:
X1[:Y1],X2[:Y2],X3[:Y3]
The value X1 is the number of bytes required to encode a character in codeset class 1. Y1 is the number of
display columns needed to display characters in this class. X2 is the number of bytes required to encode a
character in codeset 2, not counting the SS2 byte, and Y2 is the number of display columns for codeset 2
characters. X3 is the number of bytes needed to encode characters in codeset 3, not counting the SS3 byte,
and Y3 is the number of display columns required for these characters. The values for the column widths
may be omitted if they are equal to the number of encoding bytes. If the encoding value of any of the EUC
codesets is set to
0 (zero), this indicates that the codeset does not exist. See the WARNINGS section for
special warnings on the values of the cswidth argument.
If no cswidth argument is supplied, the eucset command uses the value of the CSWIDTH environment
variable. If this variable is not present, the following default string is substituted:
HP-UX Release 11i: December 2000 − 1 − Section 1−−239
___
___