Command Reference Guide

__________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________
STANDARD Printed by: Nora Chuang [nchuang] STANDARD
/build/1111/BRICK/man1/!!!intro.1
________________________________________________________________
___ ___
c
ckconfig(1) ckconfig(1)
NAME
ckconfig - verify the path names of all the FTP configuration files.
SYNOPSIS
/usr/bin/ckconfig
DESCRIPTION
The ckconfig utility is used to verify the path names of the FTP configuration files,
/etc/ftpd/ftpusers, /etc/ftpd/ftpaccess, /etc/ftpd/ftpconversions,
/etc/ftpd/ftpgroups, /etc/ftpd/ftphosts, /var/adm/syslog/xferlog, and
/etc/ftpd/pids/*.
This utility checks to see that all the FTP configuration files are in the path specified. If it is not able to find
the configuration files in the path, it will give out an error message to the system administrator about the
same.
FILES
/usr/bin/ckconfig
AUTHOR
ckconfig was developed by the Washington University, St. Louis, Missouri.
SEE ALSO
ftpusers(4), ftpconversions(4), ftpaccess(4), ftphosts(4), ftpgroups(4), xferlog(5).
Section 1−−94 − 1 − HP-UX Release 11i: December 2000
___
___