HP AD278A and AD279A PCI Multiplexer Release Notes HP-UX 11i v2 and HP-UX 11i v3 (5900-2200, February 2012)

Known problems
The pmux_diag/pmux_stty loop back test might not respond, if a terminal is connected to a
pci_mux1 port and the pmux_diag/pmux_stty loop back test is run from that terminal on the
same pci_mux1 port.
Workaround
HP recommends customers not to run the pmux_diag/pmux_stty loop back tests on a pci_mux1
port if the pmux_diag/pmux_stty is running on a terminal, which uses the same pci_mux1
port.
Limitations
Table 1 lists the slot limitations of AD278A PCI MUX 8-port adapter.
Table 1 AD278A PCI MUX 8-port adapter slot limitations
PCI MUX 8-port adater not supported onServer
Slot 4rp3410
Slot 4rp3440
Slot 4rx2620
Table 2 lists the slot limitations of AD279A PCI MUX 64-port adapter.
Table 2 AD279A PCI MUX 64-port adapter slot limitations
PCI MUX 64-port adater not supported onServer
Slot 4rp3410
Slot 4rp3440
Slot 4rx2620
• The pmux_stty utility supports the following features:
◦ -a
◦ +dtr(-dtr)
◦ +rs
◦ -c
◦ lb
◦ -m
• HP System Management Homepage (HP SMH) supports printer configuration on HP-UX 11i
v3 systems.
NOTE: System Administration Manager (SAM) is deprecated in HP-UX 11i v3. HP System
Management Homepage (HP SMH) is the system administration tool for managing HP-UX 11i.
SMH provides web-based systems management functionality, at-a-glance monitoring of system
component health, and consolidated log viewing. SMH also provides Terminal User Interfaces
(TUIs).
Defects fixed in this release
Table 3 lists the defects fixed in this release.
Defects fixed in this release 5