STM: Tutorial

Exercise->* On Menus/
Firmware Update->* Commands...
Expert Tool->* On Home Topic...
Utility->* On Help...
Latest Logs-> On Version...
Tool Management->
Cascade Menus
The entries above marked with "->" display one of the cascade menus shown below. Each tool (marked with "*")
generates the cascade menu shown below labeled "*(Tools)->".
Record Command File-> Sel System to Test-> *(Tools)->
------------------- ------------------ --------
Start Recording... Connect to Systems... Run
Stop Recording Select Current System... [Information Log...]
Disconnect Systems... Activity Log...
Record Output-> Failure Log...
------------- License-> Info...
Start Recording... -------
Stop Recording Display Tool Management->
Record Map Install... ---------------
Install HP-Only... Abort Tool
Administration-> Deinstall Suspend Tool
-------------- Resume Tool
Read UUT Config File Kill Tool
Update Tool Info Tool Options-> Abort Utility...
STM Startup ------------ Kill Utility...
STM Shutdown Information... Display "Query Pending"
Local UUT Logs-> Verify...
Diagnose... Daemons->
Exercise... -------
Local UUT Logs-> Firmware Update... Daemon Startup...
-------------- Expert Tool... Daemon Shutdown...
Map Log... Utility... Daemon Kill...
System Activity Log... Tool Launch... Daemon Activity Log...
syslog
Latest Logs->
-----------
Activity Log
Failure Log
STM Tutorial: mstm Commands
In mstm, you traverse screens and menus, and select commands from pulldown menus, which are similar to those found
in xstm: There are two types of screen navigation:
Navigating between screens
Navigating within screens
To navigate between one screen and another, use the Tab key. To navigate from one portion to another portion of the
same screen , use the Prev and Next keys (or, alternatively, the Cursor Up and Cursor Down keys). You use the menu
bar to do the following:
Position the cursor on the menu bar -- Use the Tab key (or the MenuBar on/off function key).
Move to a particular pulldown menu -- Use the cursor arrow keys.
Expand a menu/sub-menu -- Use the Return key.
Highlight a command or sub-menu -- Use the cursor keys.
Perform a command -- Use the Return key.
Invoke a menu directly -- Use Alt function key; then hit non-underlined character in menu title
Activate a menu command/expand pulldown sub-menu -- Hit the letter which is underlined in command or
sub-menu.
Menu Bar
File Menu System Menu Device Menu
--------- ----------- -----------
Save Config... Sel System to Test-> Current Device Status...
Restore Config... Save Map... Clear Tool Status
Record Command File-> Print Map... Select All