STM: Tutorial

To select a specific device for testing, place the cursor on the specific device and press Return; all other
devices are unselected. (To select a device and leave all other selected devices in their current state, place
the cursor on the specific device and press the space bar.)
You can use the TAB key to activate a pull down menu which allows you to select the specific tool that you
want to run on the selected device(s).
Example of the mstm system map:
STM Tutorial: cstm System Map
The Command line user interface (cstm) system map displays a character-based view of the system. The
information displayed includes the device type, device path, last active tool, and test status.
Devices are selected by using the select command with a parameter (device number or path identifier)
specifying the device at the user prompt. A minus sign (-) in front of the parameter unselects the device.
For example:
select device 1
selects the device assigned device number 1
select path 24.0.0
selects the device on path 24.0.0
select device -4
unselects the device assigned device number 4
select path -8.1
unselects the device on path 8.1
Specific tools are run by using the tool command (e.g. map, verify, exercise, etc.) with a parameter (device