STM Release Notes for HP-UX 11i v3 September 2010 Release

This section describes the defect fixes and changes made to STM for the current release.
The following information applies to both Itanium Processor Family (IPF) and PA-RISC systems:
QXCR1001011856
Problem: stm incorrectly issues kill SIGHUP -1 when fork fails due to insufficient memory.
Problem Description: If cstm fails to fork STM due to shortage of memory, it issues ' kill SIGHUP -1 ' and
causes programs running on systems to exit. This issue occurs when cstm is running on systems with shortage of
memory.
Resolution: This issue is fixed.
QXCR1001005736
Problem: HP SMH reports NETAPP LUN as degraded message.
Problem Description: cstm output displays the message in NETAPP LUN as "Information Incomplete".
Resolution: This issue is fixed.
QXCR1001025474
Problem: On RMCA, diaglogd creates MCA files and SFM generates an MCA indication .
Problem Description: When RMCA occurs, diaglogd writes RMCA files to /var/tombstones directory. These
files are considered as MCA files and SFM generates an MCA indication with 100662 and 100661 events .
Resolution: Diaglogd has been updated to not write any MCA files into /var/tombstones directly upon
receiving an RMCA.
The following information applies only to Itanium-based systems:
None
Documentation
For the latest and most complete information on STM refer to the Diagnostics section of Hewlett-Packard's online
documentation Web site at:
http://www.hp.com/go/hpux-diagnostics-docs
This site provides manuals, tutorials, FAQs, and other reference material.
For the most current information on HP-UX 11i v3 (11.31) diagnostics, see the following Web page at the Diagnostics
site:
http://www.hp.com/go/hpux-diagnostics-docs
Online Help
Online help for STM is available at the following URL.
http://www.hp.com/go/hpux-diagnostics-docs
It is available on the local disk at:
xstm main help:
file:/usr/sbin/stm/catalog/C/HP-UX_B.11.31/ui/stmx.htm
mstm main help:
file:/usr/sbin/stm/catalog/C/HP-UX_B.11.31/ui/stmm.htm