STM Online Help: xstm Online Help (graphical interface)

The "Map Refresh Rate" field allows you to specify how often (in seconds) the device map is to be updated; the default
is every 2 seconds. When the user interface is being run on a system other than the system under test, the device map
information is sent between the systems at this rate.
Display xstm Device Map in Text Format
The "Display xstm Device Map in Text Format" field allows you to display the device map in a format similar to that
used in the menu interface, while running xstm; the default is "not set" (i.e., the icon map option is selected).
Path
Select this checkbox to include path information in the device map; that is, the hardware address of a device, like
"2.4.3".
Path Field Width
The "Path Field Width" field allows you to specify how many characters are to be used to display the hardware path
information in the line oriented maps (all maps but the xstm icon map). An additional space, not counted in the field
width, is used to separate fields. In all line oriented maps, you can leave more room on the line for other items by
eliminating an item from the map, or by restricting its width.
Product
Select this checkbox to include product name information in the device map; for example, "HP 19744R".
Product Field Width
The "Product Field Width" field allows you to specify how many characters are to be used to display the product name
in the line oriented maps (all maps but the xstm icon map). An additional space, not counted in the field width, is used
to separate fields. In all line oriented maps, you can leave more room on the line for other items by eliminating an item
from the map, or by restricting its width.
Active Tool
Select this checkbox to ensure that the device map indicates which tool(s) is currently active.
Time Used
Select this checkbox when you want to show elapsed time during non-interactive tool execution.
Time to Go
Select this checkbox when you want to show time remaining during non-interactive tool execution.
Loops Done
Select this checkbox when you want to show how many complete repetitions of a non-interactive tool test have been
completed.
Loops to Go