STM Online Help: xstm Online Help (graphical interface)

"Products" is defined as "Product (Qualifier)." "Product" and "Qualifier" are displayed in the device map and by the
Current Device Status command.
Examples of "Products" include:
Built-in Keyboard/Mouse (2e)
Bus Adapter (580)
CPU (5a1)
SCSI Disk (SEAGATE31200N)
SCSI Tape (HP35480A)
Don't select anything if you do not want to use the product to deselect devices.
Unselect Device Type and Qualifier
Scroll through the "Device Type and Qualifier" window to the device type and qualifier you wish to deselect (e.g.,
"Disk/Hard"), and click on it with the mouse. Next, move to the "Product" window , or click on "OK", as desired.
Multiple selections can be made, using the control key.
Unselect Product
Scroll through the "Product" window to the product you wish to deselect (e.g., "SCSI Disk (SEAGATE31200N)", and
click on it with the mouse. Multiple selections can be made, using the control key.
When satisfied with your selections, click on "OK".
Top
Filter
The Filter commands let you limit the number of items which are displayed in the device map at a given time. To do
so, first use the selection commands in the
Device Menu to select only the items that you wish to include in the device
map. Then use the Filter -| Set command. To include all devices in the device map, use the Filter -| Clear command.
Top
Tools Menu
The Tools Menu has eight selections:
Information: Generate an info log for a selected device
Verify: Pass/fail test of hardware's usability
Diagnose: Error isolation test to the FRU level
Exercise: Stress test of target hardware for intermittents
Firmware Update: Update firmware on a selected device
Expert Tool: Run device-specific interactive tool
Utility: Run non-device-specific xstm tools
Latest Logs: Display the latest tool logs
Tool Management: Menu to abort/suspend/resume tools and utilities
See Tools Submenu for help on running these tools, for logging help, and for additional information.