STM Online Help: xstm Online Help (graphical interface)

Top
Update Tool Info
Use this function to have the list of available tools for a selected device reread. This provides the basic functionality
for incorporating a newly installed support tool into the xstm.
Top
STM Startup
Use this function to start the diagnostic system on the local machine, i.e., the machine on which the xstm is running,
when you are logged on as root.
Top
STM Shutdown
Use this function to shut down the diagnostic system on the local machine, i.e., the machine on which the xstm is
running. You will see a warning/confirmation displayed, stating that the diagnostic system is being shut down and that
it may only be restarted by the root user. If the local Unit Under Test (UUT) is connected, it will be disconnected
before the diagnostic system is shut down.
Top
Local UUT Logs
Use this cascade to view the
Map Log and System Activity Log for the local Unit Under Test (UUT), when you cannot
access the xstm interface. The logs may contain details concerning problems encountered when the system started, or
concerning reasons that the system was caused to terminate. Additional details may be found in the "syslog" file.
Syslog
Syslog is a system log, which is administered outside the Support Tools Manager by the "syslogd" daemon. It provides
you with information logged by "syslogd" on behalf of the daemons running on the system (e.g., inetd, ftpd, etc.). The
Support Tools Manager daemon is called "diagmond", and you will find its starting and completion messages logged in
"syslog" (1 line entry for startup and 1 line entry for shutdown).
Top
Local UUT Logs Menu
The Local UUT Logs Menu has two selections:
Map Log: View the Map Log on local system
System Activity Log: View the System Activity Log on local system