STM Online Help: xstm Online Help (graphical interface)

Map Log
The Map Log contains a record of what transpired while the system map was being built. The log dialog box allows
you to view, save, and print the contents of the log, as desired.
The log is created at boot time, and whenever the Remap System command is executed.
To view the Map Log, do the following:
1. Move the cursor to the System Menu pulldown in the Main Menu Bar.
2. Select the Map Log menu selection.
The "Map Log" window is displayed.
Top
System Activity Log
The System Activity Log contains a record of system startup and shutdown events, events that occurred during
operations, and tool start and completion information. The log dialog box allows you to view, save, print , and clear the
contents of the log, as desired.
To view the System Activity Log, do the following:
1. Move the cursor to the System Menu pulldown in the Main Menu Bar.
2. Select the System Activity Log menu selection.
The "System Activity Log" window is displayed.
Top
Information Log
The information provided by the Information Log is device-specific, but should at least include:
The hardware path to the device
A timestamp indicating when the log was created
To view the Information Log, use the following procedure:
1. Go to the Tools Menu pulldown in the Main Menu Bar.
2. Move the cursor to the Information cascade menu.
3. Select Information Log....
The Information Log for the chosen device is displayed.
Top
Information Tool Activity Log
The Information Tool Activity Log allows you to review details of the most recent execution of the Information