STM Online Help: mstm Online Help (menu interface)

the firmware update tools is generic, the tools themselves are device-specific.
This function is only valid when exactly one device is selected, that device is not currently busy, and the
device supports the firmware update process.
A new window is automatically created so that you can communicate directly with the firmware update
tool(s).
NOTE: Be sure that you put the firmware file on the UUT before starting the update process.
CAUTION: Make sure you select the correct firmware file for the device! Updating a device with
incorrect firmware can make the device permanently unusable and data could be lost.
CAUTION: It is not advisable to interrupt or abort the firmware update functions.
Top
Expert Tool
Use this function to invoke the expert tool for the selected device. Expert tools are device-specific
troubleshooting utilities for use by sophisticated users. Their functionality varies from tool to tool, but they
are intended to be interactive, and rely on you to provide information necessary to perform a particular
task.
This function is only valid when you select exactly one device, that device is not currently busy, and the
selected device has an associated expert tool.
Top
Utility
Use this menu to access the set of functions for running support tools which are not device-specific.
Current tools include logging and disk backup tools.
Top
Latest Logs
The commands below this menu allow the Activity and Failure logs associated with the most recently run
tool on the currently selected devices to be displayed.
Utility Tool Log
This dialog allows you to specify which utility log information you wish to access, based on time of
execution, or the device on which the utility was run.
Utility Execution
This dialog allows you to specify which utility's log you wish to access, either the last utility executed by
the UI, or the last utility executed by the UI on a particular device.