STM Online Help: mstm Online Help (menu interface)

Adapter/Bus
Disk/CDROM
Disk/Hard
Interface/Centronics
Interface/Keyboard
Interface/LAN
Interface/RS-232
Interface/SCSI
Memory/Memory
Processor/CPU
Tape/DDS
Don't select anything if you do not want to use the device type and qualifier to deselect devices.
"Products" is defined as "Product (Qualifier)." "Product" and "Qualifier" are displayed in the device map
and by the Curr Dev Status command.
Examples of "Products" include:
Built-in Keyboard/Mouse (2e)
Bus Adapter (580)
CPU (5a1)
SCSI Disk (SEAGATE31200N)
SCSI Tape (HPHP35480A)
Don't select anything if you do not want to use the product to deselect devices.
When satisfied with your selections, hit "OK".
Top
Filter
The Filter commands let you limit the number of items which are displayed in the device map at a given
time. To do so, first use the selection commands in the Device Menu to select only the items that you wish
to include in the device map. Then use the Filter -> Set command. To include all devices in the device
map, use the Filter -> Clear command.
Top
Tools Menu
There are eight Tools functions:
Information: Generate an info log for a selected device
Verify: Pass/fail test of hardware's usability
Diagnose: Error isolation test to the FRU level
Exercise: Stress test of target hardware for intermittents
Firmware Update: Update firmware on a selected device
Expert Tool: Run device-specific interactive tool
Utility: Run non-device-specific mstm tools