STM Online Help: mstm Online Help (menu interface)

displayed; it is edited in exactly the same manner, with one major exception: you can select multiple
systems to be "current" at one time.
4. Selecting a test system, unselects all other test systems. To select additional test systems, without
unselecting the test system you have just chosen, hold down the CTRL or SHIFT key when clicking
on the names of additional test systems you wish to select.
To disconnect from one or more systems:
1. When you wish to disconnect a system(s) from the User Interface (UI), go back to the "system"
function key screen and select "sel sys to test".
2. Select Disconnect.
You will see a dialog displayed, which is similar to those you have seen displayed for "current
system" and "current system" functions. You may select one or more systems for disconnection,
using the SHIFT or CNTRL keys. (Hold down the CTRL or SHIFT key when moving the cursor to
the names of additional test systems you wish to select.)
3. Once you have selected the system(s) you wish to disconnect, hit "OK".
4. If a system you have chosen to disconnect has currently active interactive tools, you will be
cautioned that disconnecting the system will cause those tools to abort. If you wish to disconnect the
system anyway, hit "Continue".
Top
Install/Deinstall Support Tool Licenses
Most support tools do not require a support tool license. A few of the advanced tools (for example, expert
tools) require a license from HP.
The following procedure tells you how to install and deinstall support tool licenses:
1. Select the System Menu.
2. Select Install.
3. Select Install or Install HP-Only, depending upon your licensing privileges (only HP personnel
should select "install hp only").
4. Enter your password.
5. Hit "OK".
NOTE: If you selected "install", your permissions are only valid on the current test system.
If you selected "install hp only", your permissions are valid on all test systems accessible to the user
interface, until the user interface is exited. Your permissions are only valid on the system running
the user interface during the current test session.
6. To deinstall all licenses on the current test system (including any HP-Only licenses on the system),
return to the Install cascade menu selection.