STM Online Help: mstm Online Help (menu interface)

Curr Dev Status: Display device info/suggest further action
Clr Tool Status: Reset map status for devices not under test
Select: Select devices in the hardware map
Unselect: Unselect devices in the hardware map
Filter: Filter the device map
Top
Curr Dev Status
Use this function to display all known information for the selected devices, including current status, and to
receive suggestions on further actions which you might take at this point. The data displayed for each
device includes the following:
A description of the device
The hardware path, specifying the address of the hardware components leading to the device
The device type (e.g, disk, tape)
The device qualifier (e.g., SCSI, CS80)
The most recent tool executed/executing on the device
Exit status of the most recent tool run
The current status of the device
Recommended user action
The "Current Device Status" may be run at any time, even if the device is currently busy, as it does not
access the device to obtain its information.
When a utility is executing, the current status field also shows the process number for the utility.
The recommended action field is used to suggest what action you might want to take next. For example, in
the event of a tool failure, you might see a message suggesting that you examine the Act Log and the Fail
Log.
Top
Clr Tool Status
Use this function to reset the state of all selected devices which do not have a currently running support
tool process to "Untested". This function also removes the Act Log and the Fail Log for all devices.
Top
Select
This menu allows the user to select devices in a number of different ways. These include:
Select All: Choose all devices in the hardware map
Select Class: Choose several devices at the same time
Select Matching Devices: Choose all devices of the same type
Select Matching Products: Choose all devices of the same product
Select Devices Above: Choose all devices above the selected devices
Select Devices Below: Choose all devices below the selected devices