STM Online Help: cstm Online Help (command-line interface)

Syntax: firmwareupdate | fwu
Use this command to initiate the firmware update process for a selected device. While the user interface to the
firmware update tools is generic, the tools themselves are device-specific.
This command is only valid when exactly one device is selected, that device is not currently busy, and the device
supports the firmware update process.
NOTE: Be sure that you put the firmware file on the UUT before starting the update process.
CAUTION: Make sure you select the correct firmware file for the device! Updating a device with incorrect firmware
can make the device permanently unusable and data could be lost.
CAUTION: It is not advisable to interrupt or abort the firmware update commands.
Top
FWUpdateActLog
Syntax: fwupdateactlog | fal
Use this command to review the log which contains details concerning the most recent invocation of a Firmware
Update Tool on all selected devices. The command is valid when a Tool Activity Log for a Firmware Update Tool
exists for the selected device(s).
Top
FWUpdateFailLog
Syntax: fwupdatefaillog | ffl
Use this command to review the log which contains details concerning failures encountered during the most recent
execution of a Firmware Update Tool on all selected devices. The command is valid when a Tool Failure Log for a
Firmware Update Tool exists for the selected device(s).
Top
FWUpdateInfo
Syntax: fwupdateinfo | finf
Use this command to display help information unique to the Firmware Update Tools for the selected devices. It may
always be run, because it does not access the device to obtain its information.
Top
ExpertTool
Syntax: experttool | xt