STM Online Help: cstm Online Help (command-line interface)

Syntax: infolog | il
Use this command to view the log(s) generated by an Information request on all selected devices for which an
information log exists.
Top
InfoActLog
Syntax: infoactlog | ial
Use this command to review the log which contains details concerning the most recent invocation of an Information
Tool on all selected devices. The command is valid only when a Tool Activity Log for an Information Tool exists for
the selected device(s).
Top
InfoFailLog
Syntax: infofaillog | ifl
Use this command to review the log which contains details concerning failures encountered during the most recent
execution of an Information Tool on all selected devices. The command is valid only when a Tool Failure Log for an
Information Tool exists for the selected device(s).
Top
InfoInfo
Syntax: infoinfo | iinf
Use this command to display help information unique to the Information Tools for all selected devices. It may always
be run, because it does not access the device(s) to obtain its information.
Top
Verify
Syntax: verify | ver
Use this command to verify all selected devices for which a verifier command exists. The purpose of the verification
procedure is to ensure as quickly as possible that the target hardware is usable, and that you will be successful in using
the device. Verifiers don't tend to isolate down to the FRU level, nor are they generally interactive.
To verify a selected device or devices, the target device(s) must not only support verification, it must also currently be
idle.
When you first start to verify a device(s), the device(s) state on the device map will be changed to "RUNNING".
If the operation requires you to interact with the interface, the device state will change to "Query Pending". If the UI