STM Online Help: cstm Online Help (command-line interface)

SCSI Tape (HPHP35480A)
Don't select anything if you do not want to use the product to deselect devices.
Top
UnselClass
Syntax: unselclass | uscl [type {all | <device type>}] [qualifier {all | <device qualifier>}] [hwpath {<path name>}]
Use this command to deselect several devices at the same time, removing these from the number of already selected
devices. You must specify three criteria for devices to be deselected: device type, qualifier type, and hardware path.
Currently selected devices which do not meet all three criteria are not deselected by this command. This command is
retained for compatibility reasons. The UslClass command is recommended instead of this command.
Examples of device types include:
All
Autochangers
Channel Adapters
Device Adapters
CPUs
Disks
FPUs
Graphics
Printers
Tapes
Type "All" (or its index number) if you don't wish to limit the devices you are deselecting by device type.
Examples of qualifier types include:
All
CS80
FLEX
Graphics
SCSI
Type "All" (or its index number) if you don't wish to limit the devices you are deselecting by qualifier type.
The final criteria for device selection is hardware path. You can select those devices which have a hardware path
below a specified hardware path. This field should be blank, if you do not wish to limit the devices being deselected by
hardware path.
Unselect only Device Type
Scroll through the "Unselect only Device Type" screen display area to the device type you wish to deselect (e.g., "All"
or a specific device type like "Channel Adapters"), and enter its name or index number. Next, move to the "Unselect
only Qualifier" screen display area, "Unselect only Devices below Hardware Path" screen display area, or enter "ok",
as desired.
Unselect only Qualifier Type