STM Online Help: cstm Online Help (command-line interface)

Unselect
Use this command to deselect a single device on the hardware map.
Top
UnselAll
Syntax: unselall | usal
Use this command to deselect all devices on the hardware map.
Top
UslClass
Syntax: uslclass | usc [device {<device type/device qualifier>}] [product {<product (qualifier)>}]
Use this function to deselect several devices at once, removing these from the set of devices already selected. All
devices to be chosen must satisfy one of the items specified in the two lists: "Devices" or "Products". Currently
selected devices which do not match the criteria in the dialog are not deselected by this function.
"Devices" is defined as "Device Type/Device Qualifier." "Device Type" and "Device Qualifier" are displayed by the
CurrDevStatus command.
Examples of "Devices" include:
Adapter/Bus
Disk/CDROM
Disk/Hard
Interface/Centronics
Interface/Keyboard
Interface/LAN
Interface/RS-232
Interface/SCSI
Memory/Memory
Processor/CPU
Tape/DDS
Don't select anything if you do not want to use the device type and qualifier to deselect devices.
"Products" is defined as "Product (Qualifier)." "Product" and "Qualifier" are displayed in the device map and by the
CurrDevStatus command.
Examples of "Products" include:
Built-in Keyboard/Mouse (2e)
Bus Adapter (580)
CPU (5a1)
SCSI Disk (SEAGATE31200N)