STM Online Help: cstm Online Help (command-line interface)

SlClass command is recommended instead of this command.
Examples of device types include:
All
Autochangers
Channel Adapters
Device Adapters
CPUs
Disks
FPUs
Graphics
Printers
Tapes
Type "All" (or its index number) if you don't wish to limit the devices you are selecting by device type.
Examples of qualifier types include:
All
CS80
FLEX
Graphics
SCSI
Type "All" (or its index number) if you don't wish to limit the devices you are selecting by qualifier type.
The final criteria for device selection is hardware path. You can select those devices which have a hardware path
below a specified hardware path. This field should be blank, if you do not wish to limit the devices being selected by
device path.
Select only Device Type
Scroll through the "Select only Device Type" screen display area to the device type you wish to select (e.g., "All" or a
specific device type like "Channel Adapters") and enter its name or index number. Next, move to the "Select only
Qualifier" screen display area, "Select only Devices below Hardware Path" screen display area, or enter "ok", as
desired.
Select only Qualifier Type
Scroll through the "Select only Qualifier" screen display area to the qualifier you wish to select, for the device type
you chose in the "Select only Device Type" window (e.g., "All" or a specific qualifier like "CS80" or "FLEX"), and
enter its name or index number. Next, move to the "Select only Devices below Hardware Path" screen display area, or
enter "ok", as desired.
Select only Devices below Hardware Path
If you wish to select devices whose hardware path (device address) is below a hardware path of your choice, enter the
hardware path information at this prompt. For example, if you wish to select all devices below the channel adapter at
hardware path "4.2.3", enter "4.2.3" at the "Select only Devices below Hardware Path" prompt.
Once you've entered your hardware path information, enter "ok".
Top