STM Online Help: cstm Online Help (command-line interface)

Syntax: daemonstartup | dsu [daemon {<daemon name>}]
Use this command to initiate a daemon on the test machine. When invoked, a dialog appears listing all available STM
daemons on the UUT (excluding diagmond).
Top
Daemonshutdown
Syntax: daemonshutdown | dsd [daemon {<daemon name>}]
Use this command to abort a daemon on the test machine. When invoked, a dialog appears listing all available STM
daemons on the UUT (excluding diagmond).
Top
Daemonkill
Syntax: daemonkill | dk [daemon {<daemon name>}]
Use this command to kill a daemon on the test machine. When invoked, a dialog appears listing all available STM
daemons on the UUT (excluding diagmond).
This command is allowed to complete only if the daemon has been issued an abort by the Daemonshutdown command,
and has not terminated. If this command is run, and no running daemons have been issued an abort, an informational
dialog will pop up, which will tell the user to run the "daemonshutdown" command. Otherwise, this command sends a
"kill -9" command to the daemon process.
Top
Daemonactlog
Syntax: daemonactlog | dacl [daemon {<daemon name>}]
Use this command to view a daemon activity log.
This dialog has a clear button.
Top
Device Category
The Device Category includes several commands:
CurrDevStatus: Display device info/suggest further action
ClearToolStatus: Reset map status for devices not under test
Select: Choose a single device for testing
SlClass: Choose several devices at the same time
SelAll: Choose all devices in the hardware map