STM Online Help: cstm Online Help (command-line interface)

Use this command to select which system will display the testing information for the current test system, which you
choose from the list of connected test systems.
Only one test system can be selected by this command at a time; the list of test systems may be edited. When you
choose a system to be the current test system, it is automatically connected to cstm, whenever possible, if it is not
already connected.
When a new system becomes the current test system, all the displays are altered to reflect the status of this new
system. However, the previous test system remains connected to cstm, and will continue to execute any currently
active support tools.
If you exit cstm without making the previous system current again, then all interactive support tools running on that
system are terminated, and the output from them is lost (non-interactive support tools will continue to execute). You
will be warned that this is about to happen, and will be given the opportunity to cancel.
All connected systems are listed in the Status column of the list of systems available for testing.
If the connection to the current system fails, there will be no current system. You will be warned and the device map
will be cleared.
System Information
This dialog box allows you to add systems to, or delete them from, the list of test systems maintained by the interface,
and to select one system at a time to be the current test system.
To add a system to the list of systems to test, type "add", followed by the network name of the system (e.g.,
"system5.cup.hp.com") at the "Enter Command" prompt; then hit "Return".
To delete a system from the list of systems to test, type "delete", followed by the system's name or index number from
the "System to Test" area of the screen display.
When "ok" is entered, a dialog box will be displayed, prompting you for your login and password on the system you
chose to be the current test system.
Top
DisconnectSys
Syntax: disconnectsys | ds [system {<system name>}]
Use this command to disconnect from systems you have chosen to be connected with; the list of test systems is not
editable in this dialog.
Multiple systems may be selected, and are disconnected when "ok" is used to finish the dialog.
System Information
This dialog box allows you to disconnect from one or more systems at a time.
To disconnect from a system, type "delete", followed by the system name or index number from the "System to Test"
area of the screen display; then type "ok".