STM Online Help: cstm Online Help (command-line interface)

Daemonshutdown: Abort a daemon on the test machine
Daemonkill: Kill a daemon on the test machine
Daemonactlog: View a daemon activity log
Top
ConnectSys
Syntax: connectsys | cs [system {<system name>}]
Use this command to maintain a list of test systems, and to connect to those chosen (selected systems are indicated by
an asterisk in the first column). To select items, or to use the "delete" command, use either the system name or the
index number to the left of the system name. To deselect items, precede the index number or the system name with "-".
The System information portion of the dialog contains the list of test systems available, and may be edited. When
adding a test system, only the system name need be specified. The OS and OS Revision are automatically determined,
to provide the necessary information prior to system connection.
Multiple systems may be selected, and are connected when the dialog is finished by entering "ok", followed by
"Return"; "cancel" is used to abort the dialog. Another dialog is generated to prompt you for the logon name and
password necessary to establish the connection. The same name and password are used to connect all the selected
systems. An attempt to connect all the selected systems will be made; in case of an error, a list of systems not
connected will be included in the error display.
The status of each test system is listed in its entry in the list of available test systems. The possible statuses and their
meaning are as follows:
Blank: The status is blank immediately after it is added.
Connected: The test system is connected, but its state is not being displayed.
Current: The cstm displays reflect the state of this system.
Unavailable: The system could not be connected due to an error.
Not Responding: The system could not be connected due to a problem with the network.
Disconnected: The system has been disconnected.
System Information
This dialog allows you to add systems to, or delete them from, the list of test systems maintained by the interface.
To add a system to the list of systems to test, type "add" followed by the network name of the system (e.g.,
"system5.cup.hp.com") in the "Enter Command" field; then hit "Return".
To delete a system from the list of systems to test, type in "delete", followed by the index number or the system name
in the "System to Test" area of the screen display.
When "ok" is entered, a dialog box will be displayed, prompting you for your login and password on the system you
chose to be connected to.
Top
SelectCurrentSys
Syntax: selcurrentsys | scs [system {<system name>}]