STM Online Help: cstm Online Help (command-line interface)

There is only one copy of the log on a single machine, even though more than one cstm session may be executed.
Each log entry contains a label containing a timestamp, the user name, and the cstm process ID, in order to distinguish
between separate cstm sessions on the same machine (for example, "Wed Dec 7 15:18:49 1994: User Name: bobcap,
cstm Process ID: 27697").
The UI Activity Log is not temporary; all other cstm session files are removed, once the session is terminated.
If the log file reaches the configurable size threshold, a warning will be displayed to inform you.
Clear the UI Activity Log
If you select this command, you will clear the current UI Activity Log of its present contents.
Top
ReadUUTConfigFile
Syntax: readuutconfigfile | ruc
Use this command to have the current test system "diagmond" daemon read its configuration file.
Top
UpdateToolInfo
Syntax: updatetoolinfo | uti
Use this command to have the list of available tools for a selected device be reread. This provides the basic
functionality for incorporating a newly installed support tool into cstm.
Top
STMStartup
Syntax: stmstartup | ssu
Use this command to start the diagnostic system on the local machine, i.e., the machine on which cstm is running,
when you are logged on as root.
Top
STMShutdown
Syntax: stmshutdown | ssd
Use this command to shut down the diagnostic system on the local machine, i.e., the machine on which cstm is
running. You will see a warning/confirmation displayed, stating that the diagnostic system is being shut down and that
it may only be restarted by the root user. If the local Unit Under Test (UUT) is connected, it will be disconnected