STM Online Help: cstm Online Help (command-line interface)

STM has been designed so that the support tools can be run on the local machine or on remote machines.
The computer running the user interface is the UI system, and the computer being tested is the Unit Under Test or
UUT.
You can run the user interface and the support tools on the same machine. In this case, the UI machine and the UUT
are one and the same.
You can also run the STM user interface on one machine, and from it, run support tools on one or more remote
machines.
User Interface (UI): The computer system on which the user interface resides. On the UI machine, the user
views a system map of the UUT and selects STM commands.
Unit Under Test (UUT): The computer system which is being tested by the tools running under the UI. The
UUT may be the same machine which is running the UI, or a different machine.
Top
On Tasks
Preparing to Run Tools
Select a Remote System(s) to Test
Install/Deinstall Support Tool Licenses
Select/Deselect Test Options
Select Device(s)
Running Tools
Get Information on a Device
To Run a Go/No Go Test on Selected Hardware
Isolate Hardware Errors to the FRU Level (Diagnose)
Locate Intermittent Hardware Problems (Exercise)
Update the Firmware on a Specific Device
Run Non-Device-Specific Support Tools (Utilities)
Getting Information
View Device Status
View the Failure Log
View a Tool's Activity Log
To Display Various System Logs Onscreen
Troubleshooting STM
Troubleshooting the Support Tools Manager
Top
Select a Remote System(s) to Test