STM Online Help: cstm Online Help (command-line interface)

System Activity Log
The System Activity Log contains a record of system startup and shutdown events, events that occurred during
operations, and tool start and completion information. The log dialog allows you to view, save, print , and clear the
contents of the log, as desired.
To view the System Activity Log, do the following:
1. Type LocalSysActLog or "LSAL".
The "System Activity Log" screen is displayed.
Top
Information Log
The information provided by the Information Log is device-specific, but should at least include:
The hardware path to the device
A timestamp indicating when the log was created
NOTE:
You should include the firmware revision, if it is available.
To view the Information Log, use the following procedure:
1. Type InfoLog or "IL".
The Information Log for the chosen device is displayed.
Top
Information Tool Activity Log
The Information Tool Activity Log allows you to review details of the most recent execution of the Information
support tool against a specific device. The log dialog allows you to view, save, and print the contents of the log, as
desired.
To view the Information Tool Activity Log for a particular device, do the following:
1. Type InfoActLog or "IAL".
The "Tool Activity Log" for the Information tool will be displayed.
Top
Information Tool Failure Log
The Information Tool Failure Log allows you to review details of failures encountered during the most recent