Release Notes for EMS Hardware Monitors on HP-UX 11.11 (April 2012)

ManualsBrandsHP ManualsSoftwareHP-UX Online Diagnostics Software

Release Notes for EMS Hardware Monitors on HP-UX 11.11

(April 2012)

Contents

.....................................................................................................................................1

• Online Diagnostics

• Pre-requisites

• Required and Recommended Patches

• Loading Patches

• EMS Hardware Monitors Overview

• Configuring Hardware Monitoring

• Changes

• Known Problems

• Monitors Provided

• Product Documentation

• SD Product Structure

• Reporting Defects

Online Diagnostics

The Online Diagnostics software is a collection of tools that enables you to monitor

and test server hardware. It comprises the Event Monitoring Service (EMS)

framework, the EMS Hardware Monitors, and the Support Tools Manager (STM).

The Online Diagnostics tools are all contained in a Software Depot (SD) bundle,

called the OnlineDiag bundle. This bundle is distributed in the following ways:

• OE media

• HP Software Depot Web site

The following generic command lists various levels of content of the depot:

swlist -l <level> -s /<mount_point>/DIAGNOSTICS/<os_release>

where <level> = bundle Bundle level listing

= product Product level listing = subproduct

Sub-product level listing = fileset File set listing

<mount_point> Location where the CD file system

is mounted. <os_release> The OS

contents of the depot. = B.11.00

Contents 1

Summary of content (7 pages)

PAGE 1
Release Notes for EMS Hardware Monitors on HP-UX 11.11 (April 2012) Contents .....................................................................................................................................
PAGE 2
For OnlineDiag on HP-UX 11i v1 April 2012 release, the following apply: • All diagnostic defect repairs and enhancements as of August 2007, are included. Any future patches dated after August 2007 must be loaded after this version of OnlineDiag. • The new hardware resources in all active releases as of September 1, 2007 are supported. Pre-requisites Following is the software pre-requisite for installing Diagnostics and Support Tools: EMS version A.04.20.
PAGE 3
By default, events with severity levels MAJOR WARNING, MINOR WARNING, SERIOUS, or CRITICAL that are generated by the monitors are notified in the following ways: • Written to /var/adm/syslog/syslog.log • Sent to the superuser's E-mail address. All events generated by all the monitors are stored in the /var/opt/resmon/log/event.log file. To configure, enable, or disable hardware event monitoring, run the /etc/opt/resmon/lbin/monconfig monitoring request manager.
PAGE 4
swlist command. The tool achieves similar results using an alternate method. However, there is no change in the interface for this fix. • Changes to Monitors This section describes the changes made to individual monitors. Monitors are listed in alphabetical order.
PAGE 5
◦ High Availability Disk Array Monitor (ha_disk_array) ◦ High Availability Storage System (dm_ses_enclosure) – – ◦ Not applicable Changes to Platform and Interface ◦ • Not applicable UPS Monitor (dm_ups) – • Not applicable System Status Monitor (sysstat_em) – ◦ Not applicable SCSI Disk Monitor (scsi_disk) – ◦ Not applicable SCSI Cascade Monitor (scsi_cascade) – ◦ Not applicable SCSI Card Monitor (scsi123_em) – ◦ Not applicable Remote Monitor (RemoteMonitor) – ◦ Not applicable RA
PAGE 6
are provided: • AutoRAID Disk Array (armmon) • Chassis Code Monitor (dm_chassis) • Core Hardware (dm_core_hw) • Chassis Event Monitor (ia64_corehw) • CPU (lpmc_em) • Disk (disk_em) • Disk Array FC60 (fc60mon) • DS2500 Enclosure Monitor (gazemon) • Fast Wide SCSI Disk Array (fw_disk_array) • Fibre Channel Adapters (dm_FCMS_adapter) • Fibre Channel Adapter Model A5158 (dm_TL_adapter) • Fibre Channel Adapter Model A6826A Monitor (dm_QL_adapter) • Fibre Channel Arbitrated Loop Hub (dm_f
PAGE 7
SD SUB-PRODUCT: Manuals Description: Support Tools Manager Manual Pages FILESET: RELEASE_NOTES Description: HPUX STM Release Notes FILESET: STM-MAN Description: HPUX STM Manual Pages SD SUB-PRODUCT: Runtime Description: STM Manual Runtime FILESET: STM-CATALOGS Description: HPUX STM Shared Libraries FILESET: STM-SHLIBS Description: HPUX STM Shared Libraries FILESET: STM-UI-RUN Description: HPUX STM User Interface FILESET: STM-UUT-RUN Description: HPUX STM Unit Under Test Runtime Reporting Defects You can re