Online Diagnostics (EMS and STM) Administrator's Guide September 2012
Table Of Contents
- Online Diagnostics B.11.31.19.04 Administrator Guide
- Contents
- 1 Introduction
- Overview
- Hardware Monitoring
- Support Tools Manager
- OnlineDiag Bundle Media
- 2 Installing the Online Diagnostics Software
- 3 Configuring and Administering EMS Hardware Monitors
- Configuring the Fibre Channel Monitors
- Hardware Monitoring Request Manager
- Configuring Hardware Monitoring
- Running the Monitoring Request Manager
- Enabling Monitoring
- Listing Monitor Descriptions
- Viewing Current Monitoring Requests
- Adding a Monitoring Request
- Modifying a Monitoring Request
- Verifying Hardware Event Monitoring
- Checking Detailed Monitoring Status
- Retrieving and Interpreting Event Messages
- Deleting Monitoring Requests
- Disabling Monitoring
- Peripheral Status Monitor
- Configuring the Peripheral Status Monitor
- 4 Administering the Support Tools Manager
- 5 Troubleshooting Online Diagnostics
- Glossary
- Index
- 6 Support and other resources
- 7 Documentation feedback
1. Configure settings on one system using the monconfig utility.
The monitor /var/stm/config/tools/monitor/*.sapcfg file is created.
2. Modify the following configuration files, if required:
• /var/stm/config/tools/monitor/*.cfg, default_*.clcfg
• /var/stm/config/tools/monitor/Global.cfg
• /var/stm/data/tools/monitor/
NOTE: If you do not choose to modify these configuration files, the default values are used.
3. Copy all the /var/stm/config/tools/monitor/*.cfg, default_*.clcfg, and
*.sapcfg files on the new system. Do not copy a file with the name predictive, rst
(ISEE), wbem, or ovfn (HPEN) in the file name.
IMPORTANT: If you choose OpenView Configuration (OVC), you must set the initial
configuration on a system that has OVC installed. Otherwise, OVC will not be available for
use in the monconfig utility.
4. Enter the following command at the HP-UX prompt to enable the new configuration:
# /etc/opt/resmon/lbin/startcfg_client
Configuring the Peripheral Status Monitor 47