Online Diagnostics (EMS and STM) Administrator's Guide September 2012
Table Of Contents
- Online Diagnostics B.11.31.19.04 Administrator Guide
- Contents
- 1 Introduction
- Overview
- Hardware Monitoring
- Support Tools Manager
- OnlineDiag Bundle Media
- 2 Installing the Online Diagnostics Software
- 3 Configuring and Administering EMS Hardware Monitors
- Configuring the Fibre Channel Monitors
- Hardware Monitoring Request Manager
- Configuring Hardware Monitoring
- Running the Monitoring Request Manager
- Enabling Monitoring
- Listing Monitor Descriptions
- Viewing Current Monitoring Requests
- Adding a Monitoring Request
- Modifying a Monitoring Request
- Verifying Hardware Event Monitoring
- Checking Detailed Monitoring Status
- Retrieving and Interpreting Event Messages
- Deleting Monitoring Requests
- Disabling Monitoring
- Peripheral Status Monitor
- Configuring the Peripheral Status Monitor
- 4 Administering the Support Tools Manager
- 5 Troubleshooting Online Diagnostics
- Glossary
- Index
- 6 Support and other resources
- 7 Documentation feedback
Table 5 High-Availability Storage Systems (continued)
Special RequirementsModel/Product NumberProduct
None2300HP SureStore Disk System: Supported by High-Availability
Storage System Monitor (dm_ses_enclosure)
None2405HP SureStore Disk System: Supported by High-Availability
Storage System Monitor (dm_ses_enclosure)
Fibre Channel SCSI Multiplexer Monitor (dm_fc_scsi_mux) supports A3308A HP Fibre Channel
SCSI Multiplexer. The monitor requires firmware version 3840.
Table 2-4 lists the supported Fibre Channel adapters and their requirements.
Table 6 Fibre Channel Adapters
Special RequirementsModel/Product NumberProduct
For product support information, see
the HP Support Center at:
A3404A
A3591A
A3636A
A3740A
HP Fibre Mass Storage Channel Adapters: Supported
by Fibre Channel Mass Storage Channel Adapter
(dm_FCMS_adapter)
http://www.hp.com/go/hpsc
For information about the monitor, see
the monitor data sheet at:
http://www.hp.com/go/
hpux-diagnostics-docs
For information about the driver and
the STM versions required for the Fibre
A5158A
A6684A
A6685A
A6795A
HP Fibre Channel Mass Storage Channel Adapter:
Supported by Fibre Channel Mass Adapter Monitor
(dm_TL_adapter) Channel host bus adapters, see the
HP Support Center at:
http://www.hp.com/go/hpsc
For information about the monitor, see
the monitor data sheet at:
http://www.hp.com/go/
hpux-diagnostics-docs
HP-UX 11i v1 September 2003
release of the Support Tools bundle or
later
A6826A, A9782AHP Fibre Channel Mass Storage Adapters
Supported by Fibre Channel Adapter Monitor
(dm_ql_adapter)
For information about the driver and
the STM versions required for the Fibre
Channel host bus adapters, see the
HP Support Center at:
http://www.hp.com/go/hpsc
For information about the monitor, see
the monitor data sheet at:
http://www.hp.com/go/
hpux-diagnostics-docs
HP-UX 11i v3 September 2007
release or later
403619-B21: 2-port
4Gbps PCIe Fibre
HP Fibre Channel Mass Storage Adapters
Supported by Fibre Channel Adapter Monitor
(dm_ql_adapter) For information about the monitor, see
the monitor data sheet at:
Channel Mezzanine
Adapter
AD000–60002: 2-port
2Gbps PCIe Fibre
http://www.hp.com/go/
hpux-diagnostics-docs
Channel Mezzanine
Adapter
HP-UX 11i v1 December 2006 release
or later
AD193A and AD194A
GigE cards
HP Fibre Channel Mass Storage Adapters
Supported by Fibre Channel Adapter Monitor
(dm_ql_adapter) For information about the monitor, see
the monitor data sheet at:
Software and Hardware Requirements 15