Online Diagnostics (EMS and STM) Administrator's Guide March 2013

3. Select the device that you want to test using the device number or the device path. For example,
to select the SCSI Disk (SEAGATEST31200), enter the following command at the cstm prompt:
cstm>sel dev 5
or
cstm>sel path 32.11.0
An asterisk (*) sign to the left of the device number indicates the device you selected, as shown
in Figure 4-15.
Figure 20 Selecting a Device (cstm Interface)
4. Enter the following command at the cstm prompt for a list of commands to run various tools:
cstm>help more
The list of commands is displayed, as shown in Figure 4-16.
Figure 21 Running a Test (cstm Interface)
5. Enter the name of the tool at the cstm prompt to run a test, as shown in the following example:
cstm>verify
58 Administering the Support Tools Manager