Online Diagnostics (EMS and STM) Administrator's Guide March 2013

Table 7 System (continued)
Special RequirementsModel/Product NumberProduct
NoneNALow-Priority Machine Checks (LPMCs) on PA8500-based
(PSCX-W) systems: Supported by LPMC Monitor
(lpmc_em)
All Itanium-based systems
running HP-UX 11i v2 or later;
NAIntelligent Platform Management Interface (IPMI) Forward
Progress Log (FPL) entries on the system: Supported by
IPMI Forward Progress Log Monitor (fpl_em) All PA-RISC-based systems
running March 2003 release of
HP-UX 11i v2 or later. The
ia64_corehw monitor must be
running.
NoneNASystem status (whether the monitored systems are up and
running and whether they have the Online Diagnostics
software installed): Supported by System Status Monitor
(sysstat_em)
HP-UX 11i v2 December 2007
release or later
rx7640
rx8640
PCI Express Interface: Supported by Itanium Core
Hardware Monitor (cpe_em)
SD16B
SD32B
SD64B
The SCSI123 Monitor (scsi123_em) supports SCSI1, SCSI2, and SCSI3 interface cards on all
HP-UX systems.
Table 2-6 lists the requirements of other supported hardware devices.
Table 8 Other Supported Devices
Special RequirementsModel/Product NumberProduct
HP-UX 11i v2NAiSCSI Subsystem HP-UX software solution for
iSCSI protocol: Supported by iSCSI Subsystem
Monitor (dm_iscsi_adapter)
For information about the driver and
the STM versions required for the
Fibre Channel host bus adapters,
see the HP Support Center at:
http://www.hp.com/go/hpsc
For information about the monitor,
see the monitor data sheet at:
http://www.hp.com/go/
hpux-diagnostics-docs
NOTE: Starting with the HP-UX
11i v3 March 2008 release, the
dm_iscsi_adapter monitor is
introduced on HP 9000 and HP
Integrity systems.
NoneAll storage arrays: Supported by Remote Monitor
(RemoteMonitor)
• HP A6188A Storage Array
• HP A6189A Storage Array
• HP A6218A Storage Array
• HP A6189B Storage Array
The HP-UX monitoring daemon,
ups_mond; this daemon is
HP Power TrustHP UPS (Uninterruptible Power Systems):
Supported by UPS Monitor (dm_ups)
• A2941A (600VA)
delivered on all Series 800 systems
but not on S700 systems.
• A2994A (1300VA)
• A2996B (1.3kVA)
18 Installing the Online Diagnostics Software