Online Diagnostics (EMS and STM) Administrator's Guide March 2012

8. If a device fails a test, enter the following command at the cstm prompt to unselect all devices:
cstm>unselall
9. Select the device that failed the test. For example, enter the following command to select
device 3:
cstm>sel dev 3
10. Enter the following command at the cstm prompt to view the Failure Log of the Information
tool test:
cstm>infofaillog
The Failure Log is displayed, as shown in Figure 4-19.
Figure 24 Failure Log (cstm Interface)
11. Enter the following command to view the test activity log available in the Failure Log:
cstm>infoactlog
The Information Tool Activity Log is displayed, as shown in Figure 4-20.
60 Administering the Support Tools Manager