Online Diagnostics (EMS and STM) Administrator's Guide March 2012

The cause of the failure is displayed, as shown in Figure 4-13.
Figure 18 Failure Log (mstm Interface)
6. Read the details in the Failure Log and take appropriate actions.
Running a Support Tool Using the cstm Interface
To run a support tool using the cstm interface, complete the following steps:
1. Enter the following command at the HP-UX prompt:
# /usr/sbin/cstm
2. Enter the following command at the cstm prompt:
cstm>map
The system map is displayed, as shown in Figure 4-14.
Figure 19 System Map (cstm Interface)
Running Support Tools 57