Online Diagnostics (EMS and STM) Administrator's Guide March 2012

1. Enter the following command at the HP-UX prompt:
# /usr/sbin/mstm
The system map is displayed, as shown in Figure 4-7.
Figure 12 System Map (mstm Interface)
2. Select the device you want to test in the device map, and click Enter or Select/Deselect, as
shown in Figure 4-8.
Figure 13 Selecting a Device (mstm Interface)
3. Select Tools->Tool name->Run to run a test, as shown in Figure 4-9.
54 Administering the Support Tools Manager